Filter
Top Products
-6- Model H6082, H6083, and H6086 Heirloom Electric Guitar Kits
The majority of the wooden components in this kit
are fully machined from the factory and are ready
for assembly. A small amount of shaping, drilling,
sanding and finishing will need to be performed to
complete your guitar.
Recommended Tools & Supplies:
• Sharp Pencil
• 18" Metal Straightedge with a
1
⁄32" Resolution
• Drill Press
• Drill Bits:
1
⁄16",
3
⁄32",
1
⁄8",
5
⁄32",
3
⁄16",
5
⁄16"
• Depth Stop
• Bandsaw or Coping Saw with
1
⁄4" Blade
• ANSI Approved Respirator
• ANSI Approved Safety Glasses
• Aluminum-Oxide Sanding Paper
#150, #220,
and #320 Grit
• Wet and Dry Sanding Paper
#400, #600, and
#1000 Grit
• Flexible Sanding Block
• Wood Glue
• Chisel or Razor Blade
• Phillips Screwdriver
•
1
⁄4" Steel Rod, or a Coat Hanger
• Masking Tape
• Tack Cloth or Clean Soft Rag
• Sanding Sealer
• Assorted Wood Files
• Finishing Materials
• Buffing Compounds
• Oil Wood Finish
• Soldering Iron and Solder
• Peghead Reamer or a Round File
• Ratchet with 11MM and 14MM Sockets
• Hammer
• Small Wooden Block
• C-Clamps
• Wire Cutters
Supplies/Tools Identification
Pickups
Bridge
Strap
Button
Volume Controls
Tone
Controls
Nut
Fretboard
Fret
Tuners
Peghead
Truss Rod Cover
3-Way
Switch
Tremolo Bar
Pickups
Bridge
Strap
Button
Volume Controls
Tone
Controls
3-Way
Switch
Figure 9. Model H6086 identification.
Figure 10
. Model H6082/3 identification.
Tailstop
Figure 11. Peghead identification.