Filter
Top Products
Paper shredder HSM 411.2
10 english 0603
Before taking off the cover,
changing the location, cleaning
or anything else other than
normal operation turn off and
unplug the paper shredder!
Main te nan ce and ser vi ce work
may be per for med on ly by:
• HSM cu sto mer ser vi ce
• spe cial ly trai ned staff
(e.g. qua li fi ed electri cians)
• ser vi ce tech ni cians from our
con tracting part ners
4. Installation
• This paper shredder should never be
placed
near or over a radiator or heat source.
• The ventilation slots must not be blocked or
covered and they must be at a distance of
at least 10 cm away from walls or furniture.
• Make sure the mains plug is easily acces-
sible.
• Before plugging in the mains plug, check
that the voltage and frequency of your local
mains supply correspond to those stated on
the type plate.
Undo the wing screws securing the unit
during transportation.
Inserting the bag for shredded material
• Open front door and pull out frame with bag for shredded material.
• Fold new bag around frame and allow to overlap by approx. 20 cm.
• Push frame with guide and bag into bottom frame.
• Close front door.