Filter
Top Products
HSM 411.2 Paper shredder
0603 english 13
When the cutting capacity drops or
the noise increases:
• Lift the inspection door on the
top of the device and spray spe-
cial cutting block oil on the blade
rollers of the cutting device.
• Run cutting system forwards and
backwards several times without
feeding paper. Paper dust and
particles are shaken off.
7. Maintenance and care
Cleaning:
• Switch off the shredder, pull out the mains
plug.
• When cleaning only use a soft cloth and a
mild soap-water solution. Never use scou-
ring agents, cleaning fl uid, petroleum or
thinners.
8. Technical Data
Cutting type Strip cut Cross cut
Shred size (mm) 5.8 3.9 3.9 x 50 1.9 x 15 0.78x11 1 x 5
Sa fe ty ra ting DIN 32757 – 1 2 2 3 4 5 Level 6*
Cutting ca pa ci ty (sheets), DIN A4 70 g/m
2
80 g/m
2
65 - 67
51 - 53
48 - 50
38 - 40
38 - 40
33 - 35
26 - 28
20 - 22
17 - 19
12 - 14
9 - 10
7 - 8
Weight 74 kg 82 kg
Noise level (Idle running/ load) 60 dB(A) / 68 dB(A) 60 dB(A) / 75 dB(A)
Cutting speed 100 mm/s 110 mm
Lo ading width 400 mm
Voltage 230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
Power for the maximum number of sheets 2100 W
Dimensions W x D x H (mm) 595 x 470 x 990
Volume of shredded material bag 146 l
* HSM-specifi cation
Technical and optical modifi cations reserved