Filter
Top Products
Page
17
4
METRONOME
CHANGING THE METRONOME TIME SIGNATURE
Step 3
By default, the metronome will produce a clicking sound at a constant volume - this is a 1-beat or 1/4 time signature.
It is also possible to select alternative time signatures when appropriate. There are ten different types of metronome
time signature available: 1/4, 2/4, 3/4, 4/4, 5/4, 3/8, 6/8, 7/8, 9/8 and 12/8. When selecting a time signature other
than 1/4, a bell sound will be heard indicating the fi rst beat of the bar.
Press and hold the Metronome button, then press the S or T Value buttons to select the desired metronome
time signature.
The current metronome time signature will be shown in the
LCD display until the Metronome button is released.
ADJUSTING THE METRONOME VOLUME
To adjust the volume of the metronome, please refer to the instructions on page 42 - 13) METRONOME
VOLUME - for more information.
DEACTIVATING THE METRONOME
Step 4
When metronome information is shown in the LCD display, press the Metronome button once again to
deactivate the metronome.
The LED indicator for the Metronome button will turn off,
indicating that the metronome has been deactivated.
If the metronome has been activated, but the selected sound is shown in the LCD display, fi rst press the Metronome button
to recall the metronome information, before pressing the Metronome button once again to deactivate the metronome.
If, after the metronome has been deactivated, the Metronome button is pressed once again, the metronome will be
reactivated with the previously selected tempo and time signature.
Metro.Beat = 1/4
|