Filter
Top Products
Page
29
FUNCTION MODE
5
9)
TURNING MULTI-TIMBRAL MODE ON/OFF
The procedure described in the MIDI CHANNEL SELECT section is used to transmit or receive data on only
one of the 16 MIDI channels (CH 1 - CH 16). However, by enabling MULTI-TIMBRAL MODE, MIDI data can be
received on more than one MIDI channel, simultaneously playing a different sound on each channel. With this
feature enabled, an external sequencer can be used to enjoy ensemble performances, playing multiple sound
types on a single CN21 piano.
The term 'Multi-Timbral' is derived from the ability to play multiple timbres simultaneously.
x
Please refer to the chart below for information regarding received program numbers and the
corresponding sound types.
x
Data received through CH 10 will not be performed when MULTI-TIMBRAL MODE is enabled.
Step 1
Press and hold the METRONOME and SOUND SELECT buttons at the same time, then press the key
assigned to the MULTI function.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the key '- (off)' to set
MULTI-TIMBRAL MODE to 'off', or the '+ (on)' key to set MULTI-TIMBRAL MODE to 'on'.
The MULTI-TIMBRAL MODE setting is automatically set to 'off' when the CN21 piano is turned on.
Program Change Number Mapping
Sound Name
Multi-Timbral mode ON
Multi-Timbral mode OFF
Program # Bank MSB Bank LSB
CONCERT GRAND 1 121 0 1
STUDIO GRAND 1 121 1 2
MODERN PIANO 2 121 0 3
ROCK PIANO 2 121 1 4
CLASSIC E.PIANO 5 121 0 5
MODERN E.P. 6 121 0 6
JAZZ ORGAN 18 121 0 7
CHURCH ORGAN 20 121 0 8
HARPSICHORD 7 121 0 9
VIBRAPHONE 12 121 0 10
STRING ENSEMBLE 49 121 0 11
SLOW STRINGS 45 95 1 12
CHOIR 53 121 0 13
NEW AGE PAD 89 121 0 14
ATMOSPHERE 100 121 0 15