Filter
Top Products
Page
31
5
FUNCTION MODE
10) MULTI-TIMBRAL MODE ON/OFF
The procedure described in the MIDI CHANNEL SELECT section is used to transmit or receive data on only
one of the 16 MIDI channels (CH 1 - CH 16). However, by enabling MULTI-TIMBRAL MODE, MIDI data can be
received on more than one MIDI channel, simultaneously playing a different sound on each channel. With this
feature enabled, an external sequencer can be used to enjoy ensemble performances, playing multiple sound
types on a single CN22 digital piano.
The term ‘Multi-Timbral’ is derived from the ability to play multiple timbres simultaneously.
Please refer to the chart below for information regarding received program numbers and the corresponding sound
types.
Data received through CH 10 will not be performed when MULTI-TIMBRAL MODE is enabled.
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press the key
assigned to the MULTI function.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the key ‘- (off)’ to set
MULTI-TIMBRAL MODE to ‘off’, or the ‘+ (on)’ key to set MULTI-TIMBRAL MODE to ‘on’.
The MULTI-TIMBRAL MODE setting is automatically set to ‘off’ when the CN22 digital piano is turned on.
Program Change Number Mapping
Sound Name
Multi-Timbral mode ON
Multi-Timbral mode OFF
Program # Bank MSB Bank LSB
CONCERT GRAND 1 121 0 1
CONCERT GRAND 2 1 95 16 2
STUDIO GRAND 1 121 1 3
MODERN PIANO 2 121 0 4
CLASSIC E.PIANO 5 121 0 5
MODERN E.PIANO 6 121 0 6
JAZZ ORGAN 18 121 0 7
CHURCH ORGAN 20 121 0 8
HARPSICHORD 7 121 0 9
VIBRAPHONE 12 121 0 10
STRING ENSEMBLE 49 121 0 11
SLOW STRINGS 45 95 1 12
CHOIR 53 121 0 13
NEW AGE PAD 89 121 0 14
ATMOSPHERE 100 121 0 15