Filter
Top Products
Page
38
USB (TO DEVICE)
OPERATIONS
5
5. USB (TO DEVICE) OPERATIONS
The CN41 includes two USB (to device) ports, allowing USB memory or USB fl oppy disk drive devices to be connected
to the piano. The fi rst connected device will appear as ‘USB_A’, the second connected device will appear as ‘USB_B’.
The USB (to device) ports provide a convenient way to playback Standard MIDI File (SMF) songs. There are many
sources of SMF songs, including disks for sale from professional musicians and publishers, songs shared among
musicians and hobbyists, and Internet websites that feature SMF songs available for download.
In addition, the USB Recorder allows up to 16 independent tracks to be recorded separately.
Step1
After connecting a USB device, press the USB button.
A selection menu will be shown in the LCD display.
Step2
Press the VALUE UP button to enter USB Recorder mode.
Press the VALUE DOWN button to enter the USB Menu.
1) USB RECORDER
PLAYING BACK A SONG
Select a song or directory.
If the USB device contains any SMF song data, a list of the
fi lenames and directories will be shown in the LCD display.
Step1
Press the MENU buttons to scroll through the list of fi les and directories, then press the VALUE
buttons to select the song or enter the directory shown in the fi rst line of the LCD display.
Select the <DIR UP> entry to return to the previous folder.
If both ‘USB_A’ and ‘USB_B’ devices are connected, an
option to select the active device will also be shown in the
fi rst line of the LCD display.
Step2
Press the PLAY/STOP button to playback the selected song.
Press and hold the TEMPO button and press use the VALUE buttons to increase or decrease
the tempo of the selected song. The current tempo will be shown in the LCD display.
Step3
Press the PLAY/STOP button again to stop the song.
Press the REW button to rewind the song and the FF button to fast forward the song. The bar number and beat
number will be shown in the display. Press the RESET button to return to the beginning of the song.
A-B LOOP
The A-B Loop function allows a specifi c part of a song to be played back repeatedly. While playing
back a song, press the LOOP button at the desired loop start point (point A), then press the LOOP
button again at the desired loop end point (point B). The recorder will playback the song between
point A and point B repeatedly until the PLAY/STOP button is pressed.
‚song 1 ≥
song 2
USB Rec ≥ UP
USB Menu≥ DOWN
‚ <dir 1> ≥
<dir 2>
song1
Bar=
1- 1 Œ=120
‚ <DIR UP> ≥
song3