Filter
Top Products
Page
20
2
PLAYING THE PIANO
Step 4
Press the ORGAN button three times.
The LED indicator for the ORGAN button will
turn on.
‘1-3’ will be shown in the LED display, indicating
that the Upper section sound has been
changed to Church Organ.
Step 5
Press and hold the SPLIT button, then press the HARPSI/MALLETS button twice.
The LED indicator for the HARPSI/MALLETS
button will start to fl ash.
‘2-3’ will be shown in the LED display, indicating
that the Lower section sound has been changed
to Vibraphone.
Step 6
Press the
T
or
S
VALUE/BALANCE buttons to adjust the volume balance between the Upper and
Lower sections.
The current volume balance between the Upper
and Lower sections will be shown in the LED
display.
The sum of the Upper and Lower sections volume balances will always total 10 (e.g. ‘1-9’, ‘5-5’, ‘9-1’, etc.), with larger
values producing greater volume.
Step 7
Press the SPLIT button to deactivate split mode.
The LED indicator for the SPLIT button will turn
off.
When SPLIT mode is activated, the Lower Octave Shift function can be used to adjust the octave range for the Lower
section. Please refer to the instructions on page 43 for more information.
The influence of the damper pedal over the Lower section can also be turned on and off. Please refer to the
instructions on page 44 for more information.
Press three times
Press and hold the button
1
2
Press twice