Filter
Top Products
Page
56
4
FUNCTION SETTINGS
16) MEMORY BACKUP
This function allows the EP3 digital piano to store certain user-defi nable settings which will be recalled every
time the power is turned on.
The following settings will be stored:
• Selected sound • Transpose setting
• Individual sound settings (reverb, effects) • Metronome time signature, tempo, and volume
• Equaliser setting • Touch curve
• Function settings
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the BEAT button.
The LED indicators for the TOUCH, TRANSPOSE, and BEAT buttons will
start to fl ash, indicating that the Memory Backup function has been selected.
The name of the function ‘MEM’ (Memory Backup) and the current settings will be shown in the LED display.
Step 2
Press the
T
or
S
VALUE/BALANCE buttons to select the desired Memory Backup function.
When set to ‘rES’ (Reset), the EP3 digital piano will reset all settings to the default value, however the song and
registrations memories will not be reset.
When set to ‘uSr’ (User), the EP3 digital piano will store the current user-defi nable settings, recalling them every
time the power is turned on.
Step 3
Press the REC button to complete the desired Memory Backup operation.
‘Wrt’ (Write) will be shown in the LED display, indicating that the current user-defi nable settings are being stored.
Step 4
Press the TOUCH or TRANSPOSE button to exit Memory Backup mode.
The LED indicators for the TOUCH, TRANSPOSE, and BEAT buttons will stop fl ashing.
MEMORY BACKUP
Reset User
2
Press the BEAT button
Press and hold both buttons
1