Filter
Top Products
– 20 –
FUNCTION MODE
The Function Mode gives you access to many other useful features on your ES3/5. To enter the
Function Mode, press the Touch and Transpose buttons simultaneously. The LED indicators for
both buttons will start flashing. While holding the Touch and Transpose buttons, press the appropriate
Sound button to select the function you want to edit. Each button is assigned two functions as
listed below. Press the same Sound button again to select the alternative function. To exit the
Function Mode, press either Touch or Transpose button.
Function Display See page Function Display See page
Piano Brilliance 20 MIDI ch 24
E.Piano Tuning 20 Program # 24
Organ Voicing 21 Local Control 25
Harpsi/Mallets Symp. Reso. 21 Trans. Prg On/Off 25
Strings Temperament 22 Multi-Timbre 25
Choir/Pad Memory Backup 24 Channel Mute - 26
Bass Lower Octave 24 Lower Pdl On/Off 26
1. BRILLIANCE
Brilliance lets you adjust brightness of the preset sounds.
After selecting the “Brilliance” function by pressing the Piano
button, use the Value buttons to change the value to the desired
amount. The LED display shows the brilliance setting with a num-
ber. “0” indicates the standard setting. Brilliance can be set between
-10 to +10. Plus settings produce a brighter tone, minus settings
produce a mellower tone.
Brilliance settings are global for all the preset sounds. You can not have an individual setting for
each sound.
2. TUNING
Tuning allows you to adjust the piano’s pitch. You may need to adjust the tuning when you play
with other instruments.
After selecting the “Tuning” function by pressing the E.Piano button,
use the Value buttons to adjust the tuning. A tuning tone can be
heard. The LED display shows the pitch for “A” in Hz (Hertz). For
example, 40.0 stands for 440.0 Hz. The range of adjustment is from
427.0 to 453.0 Hz. The factory preset value is set to the modern
standard A = 440.0 Hz.