Filter
Top Products
Kawai LH-2C Quick Start Guide
6. Playing the LH-2C – Once the Language Selection Screen disappears, the Sound
Selection Screen will appear in the display indicating that the PIANO 1 Sound (Bright
Concert Grand Piano) is active. Play any key or chord and adjust the volume slider
upward or downward to a comfortable listening. Press the buttons corresponding to the
other six sounds on the LH-2C:
Piano 2 is MELLOW GRAND PIANO Organ 3 is MEDIUM ENSEMBLE
Organ 1 is SOFT STRINGS Organ 4 is LOUD ENSEMBLE
Organ 2 is MELLOW FLUTES. Organ 5 is FULL ENSEMBLE
7. Organ Expression Pedal – Locate the ORGAN EXPRESS PEDAL to the right of the
three piano pedals at the base of the LH-2C. This pedal allows you to control the volume
of the five ORGAN sounds with your right foot (piano sounds are not affected). Make
sure it is pushed forward slightly before playing any Organ sound.
8. Using the Bass Coupler – The BASS COUPLER button adds a single bass note to any
selected Organ Sound. The added bass note is one octave below the lowest note currently
being played. If you haven't already done so, press the BASS COUPLER button. The
lamp on the button should light and the Sound Selection Screen should change to indicate
the BASS COUPLER feature has been selected. You should hear the lower bass tone
with the first notes played after the BASS COUPLER feature has been activated. The
BASS COUPLER feature will only operate with notes played on the G above Middle
C and below. Also, the BASS COUPLER feature will not operate with the HYMN
PLAYER feature.
9. Using the HYMN PLAYER Feature
The unique Hymn Player feature allows anyone – even those who lack keyboard skills –
to play favorite hymns and children’s songs with just one finger. The following section
will walk you through this feature step-by-step. Please refer to the diagram on page 15
of the LH-2 Owner’s Manual to identify the buttons below.
a. Button Descriptions
The left and right SELECT BUTTONS on either side of the display are used to
select a Hymn, Children’s Song or other feature from the various menus that will
be presented in the display.
The seven FUNCTION BUTTONS (below the display) often work in pairs to
allow you to select Up/Down or Left/Right for a particular function. The display
will show clearly which functions are assigned to each Function Button at any
time. Note that the currently active function will be highlighted. The rightmost
Function Button (#7) will usually be assigned BACK functions.
The ENTER/EXIT button is used to enter or exit the Hymn Player feature.