Filter
Top Products
Installation/Setup guide
4
11
The “Enter Activation Code” screen will
appear. In the [Activation Code] field, care-
fully enter the code you wrote down in step
6, and then click [Enter]. If you did not enter
the code correctly, a dialog box informing
you of that fact will appear. Click [OK], and
enter the code again.
Once you use an activation code, you cannot
use it again.
12
When you’ve entered the correct code, the
screen shown at the right will appear.
Verify that the [License] area shows the
name of the KORG Legacy Collection -
ANALOG EDITION 2007 software, and
click [Next].
13
The “Download License” screen will appear.
Click [Start]. The license data will be down-
loaded to the USB key. Please wait until this
has been completed. When the license data
has been downloaded successfully, a dialog box will inform you of this. Click
[OK].
14
Click [Finish]. This completes the installation.
In the screen that appears, verify that the names
of the KORG Legacy Collection - ANALOG EDI-
TION 2007 software are shown, and then exit the
License Control Center.
Demo licenses for all the software titles con-
tained in the KORG Legacy Collection series
have been pre-installed in the USB key. (By
accessing the License Control Center, you can
confirm the number of times and the total hours
that each title may be used in Demo Mode before
registration is required.) The software contained in the KORG Legacy Collection -
ANALOG EDITION 2007 cannot be launched once the limited number of times
and total hours of Demo Mode use has been exceeded, until you download the
license into the USB key according to the above-mentioned procedure.