Filter
Top Products
Timbre to play only on the first two octaves. You'd set the Key Window Bottom to C2, and the Key
Window Top to C4. Now, the first Timbre will only play on C2, C4 and the key span in between…
Setting Timbre two's Key Window Bottom to D4 and Top to C7 will cover the rest of the keyboard with
another sound. Now you have a Split!! Setting up Timbre three with the same Key Windows as Timbre
two, will play the two sounds together… a Layer!!!
Now that you have the basics, let's apply what we've learned to create a Combination. First, we'll get
into the edit mode:
1. Press the COMBI button to enter the Combination mode.
2. Press the EDIT button to enter the Combination Edit mode.
Next, we'll initialize the Combination, so that all of the parameters are reset:
1. Press the 8 button on the left-hand side of the keyboard. (It's also marked "Effect Speed").
2. Push the up directional button on the right-hand side of the screen two times. This will bring you to
page 8C - "Init Combi".
3. Press the YES button on the left-hand side of the screen twice. This will reset the Combination for
editing.
Now, we'll select the sounds for our setup:
1. Press the "1" button on the left-hand side of the unit (It's also marked "Octave Type"). This will take
you to screen 1A "Program 1-4". Here, you can see and select sounds for the first four Timbres.
2. Using the value slider or YES/NO buttons, set the first Tambre to "A06" (NuFretless). This will be our
Bass sound for the left hand.
3. Press the right directional button once to highlight the sound for the second Timbre.
4. Using the value slider or YES/NO buttons, set the second Timbre to "A01" (N Piano). This will be our
first sound for the right hand.
5. Press the right directional button once again to highlight the sound for the third Timbre.
6. Using the value slider or YES/NO buttons, set the third Timbre to "A05" (N Strings). This will be our
other sound for the right hand.
Next, we'll turn those three Timbres on:
1. Press the "3" button on the left-hand side of the unit (It's also marked VDF EG Octave) This will take
you to screen 3A "Channel". The first Timbre should already be set to "1G".
2. Timbre three should be highlighted from selecting the sounds on the previous screen. Press the left
directional button once, so that the second Timbre's channel setting is highlighted.
3. Using the value slider or YES/NO buttons, set the second Timbre to "1G".
4. Press the right directional button once again to highlight the third Timbre.
5. Using the value slider or YES/NO buttons, set the third Timbre to "1G".
Now, we'll tell each sound where it should play. Here's how it's going to be set up: