4
PX3
Setting up, program selection & tuner mode
• Connect Cables.
• Turn the power switch on. First “click” turns on the power, second “click” turns on
the Backlit LCD (when using batteries, use only when needed to save battery life)
• Set the Input level switch (H: High output humbucking pickups) (L: Low output
single coil pickups)
• Use the +/- buttons to select a program.
• Use the Value Dial to adjust the master level.
• Bypass /Mute operation - Press the Bypass/Mute and all the Effects will be turned
OFF. Hold the button for longer then a second and the Output will be Muted.
• The Tuner works in both the Bypass and Mute modes.