Filter
Top Products
01: Phaser
143
01: Phaser
This effect is a monaural-in/stereo-out phaser, with a two-band equalizer, that allows you to control the
tonal quality of the effect sound.
a
LFO Waveform Triangle, Sine Selects LFO Waveform.
LFO Shape –100…+100
Determines how much the LFO waveform is changed.
☞
P.32
b LFO Phase [degree] –180…+180 LFO phase difference between the left and right
☞
P.65
c
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…Tempo Modulation source of LFO speed. AutoFade is available.
Amt –20.00…+20.00Hz Modulation amount of LFO speed
d Manual 0…100 Sets the frequency to which the effect is applied.
e Depth 0…100 Depth of LFO modulation
f Resonance –100…+100 Sets the resonance amount.
☞
P.35
g High Damp [%] 0…100% Resonance damping amount in the high range
☞
P.35
h
EQ Trim 0…100 2-band EQ input level
LEQ [dB] –15…+15dB Low-EQ gain
HEQ [dB] –15…+15dB High-EQ gain
i Spread 0…100 Sets the width of the effect sound’s stereo image.
☞
P.65
j
Output Level –100…+100
Sets the balance between the effect and dry sounds.
☞
P.35, 142
Src None…Tempo Modulation source of effect balance.
Amt –100…+100 Modulation amount of effect balance
Mono In - Stereo Out
Send1
Resonance
Spread
LFO Phase
High Damp
Return1
Left
Return1
Right
EQ Trim
LEQ
HEQ
Phaser
Phaser
LFO Shape
LFO: Tri / Sine
Output Level
Output Level