Filter
Top Products
16: Tempo Flanger
33
size1
16: Tempo Flanger
This Flanger allows you to match the LFO cycle with a song’s tempo. For example, you can apply the
Flanger synchronizing to a sequencer rhythm pattern, or you can input a tempo before a live performance
so that the flanging effect will match the song tempo. The LFO cycle can be set in steps of one note.
a Delay Time [msec] 0.0…50.0msec Delay from the original sound
b LFO Waveform Triangle, Sine Selects the LFO waveform.
c LFO Shape –100…+100
Determines how much the LFO waveform is changed.
☞P.32
d
LFO Mode Manual, D-mod
Switches between the specified tempo and clock sync.
☞P.33
Src (fixed) Tempo Source when LFO Mode = D-mod (fixed to Tempo)
e Tempo [beat/min] 30…250 beat/min Tempo when LFO Mode = Manual
☞P.33
f Length 1…16/1…16
Sets the LFO cycle. LFO Cycle = Length x Whole Note.
☞P.33
g Depth 0…100 Depth of LFO modulation
h Feedback –100…+100 Feedback amount
☞P.32
i High Damp [%] 0…100% Feedback damping amount in the high range
☞P.32
j
Wet/Dry
–Wet…–1:99, Dry,
1:99…Wet
Sets the balance between the effect and dry sounds.
☞P.25, 32
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
d: LFO Mode
d: Src (fixed)
This parameter selects the LFO operation mode. When Manual is selected, the
LFO refers to the value set in e: Tempo. When D-mod is selected, the LFO will
synchronize to the internal MIDI clock. This is useful for performance using a
sequencer.
When D-mod is selected for the LFO mode, the source is fixed to Tempo and
cannot be changed.
e: Tempo [beat/min] This parameter sets the tempo when Manual is selected for the LFO Mode.
f: Length This parameter sets the LFO cycle. The cycle is calculated by multiplying the
length of a whole note by the value of Length.
For example, when Length is set to 1/4, the Flanger will sweep at an interval of
one quarter note.
Flanger
In
Feedback
LFO Shape
LFO: Tri / Sine
Wet / Dry
Mono In - Mono Out
High Damp
Tempo
LFO Mode
D-mod
Manual
Length: 1/4
120 [beat/min]