Filter
Top Products
12
ENGLISH
3. SYS.SETUP
Display the MAIN MENU on the LCD of the
RC2001, then press the button next to the SYS.
SETUP indicator.
The items below can be set in the SYS.SETUP
screen.
• CLOCK (Clock setting)
•
BACK LIGHT (Backlight illumination time
setting)
• LCD (LCD setting)
• BEEP (Beep sound setting)
• MEM CLEAR (Initialization setting)
CLOCK (CLOCK SETTING)
This sets the clock for the RC2001.
1.
Press the button next to the CLOCK
indicator in the SYS.SETUP menu screen
in the LCD to display the clock setting
screen.
2.
Use the numeric buttons (0 to 9) and cursor
buttons (t and u) to set the current time.
After setting the correct time, press the
ENTER button.
3.
The message COMPLETED is displayed
in the LCD to indicate that the clock setting
is completed.
• Either press the ENTER button or
wait three seconds for the LCD to
automatically return to the SYS.SETUP
menu.
• Pressing the Home button returns the
LCD to the MAIN MENU.
Notes:
The clock can become out of sync over time.
Please check it occasionally and set to the correct
time if necessary.
The clock setting is not backed up when the
batteries are replaced. Please reset the time after
replacing the batteries.