Filter
Top Products
6
ENGLISH
BASIC OPERATION
RC2001 BUTTON SETTINGS
The Wizz.it 3 editor software can be used to
make the settings for the IR Command, LINK,
JUMP, One Touch Operation (Macro) and other
functions in the RC2001.
This enables a customized user interface,
optimized for the customer s environment, to
be built.
The Wizz.it 3 editor software can be downloaded
from www.marantz.com. For more information
about the setting procedures, see the PC Editor
Software Wizz.it 3 User Guide.
This is the basic operation procedure for the
RC2001.
1.
Press the Home button to enter Home
mode for the RC2001.
2.
Select the devices that are set in Home
mode.
3.
Perform operation of the device that you
want to control in the selected device
mode.
4.
To control another device, return to Home
mode and select another device.
The preinstalled default user fi le is used to control
Marantz products. The AV receiver device input
switching code is assigned to the button next to
the displayed device name of the device mode.
Example:
After DVD mode is selected in the remote
controller, pressing the button next to DVD,
shown in the fi rst column in the LCD, transmits
the AV receiver DVD input command.
DVD input command for Marantz AV Receiver.
SLEEP TIMER
The SLEEP TIMER is a function that sends a
preset remote command after the sleep time has
elapsed.
• The setting is made using the Wizz.it 3 editor,
and the buttons that are assigned to the sleep
timer are operated as shown below.
• This is a convenient function for devices that
do not have a sleep timer or for setting the
sleep timer using multiple devices.
• The RC2001 performs regular operation even
when the sleep timer is activated.
1.
Press the button that will be assigned to the
sleep timer. The message PROCEED? is
displayed on the LCD.
2.
Each time the button is pressed, the sleep
setting time changes in the cycle shown
below.
PROCEED?
SLEEP 30 SLEEP 60
SLEEP OFF SLEEP 120
SLEEP 90
3.
When the time that you want to set is
displayed, wait at the setting for three
seconds.
• The sleep setting screen is no longer
displayed on the LCD, and the sleep
timer is automatically started.
And the sleep timer icon is displayed in
Sub Info area of the LCD.
• When the remaining time for the
sleep timer setting is 10 minutes, the
remaining time is displayed in the Sub
info. area of the LCD.
SLEEP TIMER
icon