Filter
Top Products
14
Rotate the MONITOR switch to
the CAMERA position.
1
Open the camera compartment.
The camera will then show the
image on the built-in screen.
Rotate the Camera Focus
Adjusting Ring located on the
outside of the lens to adjust the
camera’s focus.
3
When connected to an external
TV, slide the CDG/CAMERA
switch to the CAMERA position to
see the image from the camera on
the external TV.
2
USING THE BUILT-IN CAMERA
OPERATION (CONTINUED)
V-HOLD CONTRAST BRIGHTNESS
If the picture moves up and down
or rolls, rotate to adjust the
vertical hold.
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
If the picture is too light or too
dark, rotate to adjust the
brightness.
ADJUSTING THE PICTURE
When watching a CD+G on the monitor screen, adjust the brightness, v-hold and contrast as follows:
NOTE: When the MONITOR switch is in the CAMERA position, you can still playback a CD.
MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 14