Filter
Top Products
ES
ur
ect
uts
ou
will
15
ur
ve
o
o
a
14
INSTALLATION
AC Power Plug
STEP
Plug the female IEC socket of the
supplied AC cord into the IEC
receptacle on the rear of the amplifier.
Plug the 2 prong plug into
120V 60 Hz wall outlet.
CAUTION! Typically the
preamp/receiver’s switched outlet
is not rated for a power amplifier.
Just like a computer or printer, the SI-2125
has an AC cord which unplugs either at the
amp or at the wall for your convenience.
If you use a grounded power strip, surge
suppressor or extension cord, verify that
proper ground is maintained.
The SI-2125 draws a maximum of
approximately 700 watts from an AC wall
outlet. Use the auto turn on circuit instead.
DS00354AMY/SI-2125 10/10/03 11:12 AM Page 15