Filter
Top Products
33
ADDENDUM: SETTING THE VIDEO FORMAT
You can change the video format by using a special key combination, allowing you
to use the mixer around the world. Note this is not available on older versions of
the AVM01. If this manual was included with your unit, then the feature is
available.
Here is the way to set the AVM01 to different worldwide TV systems.
Press and hold the following keys for over 10 seconds to get your desired system:
Color + FX A ON (A-bus): NTSC 3.58 (North & South America, parts of Asia)
Color + Still (A-bus): PAL (Europe, Middle East, Africa, Australia)
Color + Strobe (A-bus): PAL N (Argentina, Paraguay, Uruguay)
Color + Mosaic (A-bus): SECAM (Eastern Europe, North Africa, France)
Color + Paint (A-bus): PAL M (Brazil)
Color + Invert (A-bus): NTSC 4.43 (special purpose, not widely used)
CAUTION: Your mixer will not work properly unless it is set to the proper
format which matches the input video signals.
Manual Version 9.0