Filter
Top Products
Cueing Section
1. Cue Source Knob: Selects the audio source that will be heard through the headphones.
2. Blend Knob: Mixes the headphone output between the selected Cue Source and the Master
Output.
3. Headphone Knob: Sets the headphone volume level.
Video Effects Controls
Each Bus has its own effects control section. These are labeled 8 and 10 on the Top Panel Overview.
Note that the video effects do not appear on the Monitor Outputs but do appear on the Master Output.
Overview of buttons:
1. Paint Button: Merges shades of colors and forms an abstract picture (sometimes called
“posterization”). There are three levels of intensity available.
2. Strobe Button: Creates a “stop action” effect. There are three speeds available.
3. Mosaic Button: Breaks up the image into patterns of shaded colors to form an abstract
picture. There are three sizes of mosaic squares available.
4. FX On Button: Toggles all effects on and off.
5. Invert Button: Creates a negative of the image.
6. Still Button: Freezes the image on the selected Bus.
To use the effects section:
1. Select one or more effects to turn on.
2. Buttons 1, 2 and 3 have three separate levels of the effect (Off, Level 1, Level 2, and Level 3).
Press the button to cycle through effects.
3. Press the FX On button to turn on/off effects for a specific Bus.
4. Any effect that is on will have a lit LED.
5