Numark Industries DM2000X DJ Equipment User Manual


 
Professional Disc Jockey Products
Warranty and Service Information
Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”) warrants each new product
manufactured and/or supplied by it to be free from defects in material or workmanship under conditions of
normal use and service for 360 days, beginning on the date of purchase from an authorized Numark Dealer,
but not to exceed 2 years from date of shipment by Numark.
The Numark obligation under this warranty is limited to repairing or replacing, at its option, the product
or part(s) therein; which upon examination by Numark shall appear to be defective or not up to factory
specifications; providing the Numark product is returned (transportation prepaid) to Numark.
Numark shall not be liable for any damages, consequential or otherwise, resulting from the use and
operation of this product and makes no other warranty(s) either express or implied on this product, including
any warranty of merchantability.
This warranty does not extend to any of our products which have been subjected to misuse, neglect,
accident, incorrect wiring not our own, improper installation, or use in violation of instructions furnished by
us, nor extended to units which have been repaired or altered outside of our factory, nor to cases where
the serial number thereof has been removed, defaced, or changed, nor to accessories used therewith not of
our own manufacture. Numark reserves the right to make changes or improvements in its products, during
subsequent production, without incurring the obligation to install such changes or improvements on
previously manufactured equipment.
To place this warranty into effect, the enclosed WARRANTY REGISTRATION CARD must be
returned to Numark Industries, LLC within thirty (30) days after date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Some states do not allow the exclusion or limitation of incidental or consequential damages so the
above limitation or exclusion may not apply to you.
EQUIPMENT TRANSPORT
A Return Authorization number should be obtained from Numark through the addresses or phone
numbers below.
It is the customer’s obligation, when returning faulty equipment, to properly pack the Numark
equipment in its original packaging. Failure to do so may inadequately protect the equipment in transit and,
therefore, jeopardize the customer’s warranty. The defective Numark equipment should be sent, FREIGHT
PREPAID with Return Authorization number to:
NUMARK INDUSTRIES
11 Helmsman Road
North Kingstown, RI 02852. U.S.A.
Attention: Service Department
Telephone: +1 (401) 295-9000
Fax: +1 (401) 295-5200
E-mail: numark@numark.com