Numark Industries SM-3 DJ Equipment User Manual


 
PRO SM-3
- The Leader in DJ Technology
©1999 Industries - 9 - http://www.numark.com
QUICK SETUP DIAGRAM
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all
input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the
stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC
power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources
such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off, always
reverse this operation by turning off amplifiers, then your mixer, and then input devices.