Filter
Top Products
Features
Ring Resume*
The modem can “wake up” the laptop when a message is being received
(the modem is powered on and the laptop is in “Suspend” mode). The
following change to the BIOS setting is necessary to begin utilizing
the Ring Resume feature. Re-boot the laptop, when the Panasonic
screen appears, press “F2” to enter the PhoenixBIOS Setup Utility.
4
Description (cont.)
Select “Advanced” then “Ring Resume”, press [Enter] to display the
Ring Resume options and select “Enable”, “Disable” is the default
setting. Then press [Esc] then [Enter] to “Save values & Exit”. The
laptop will restart. Use the legend at the bottom of the menu for key
stroke instructions.
The “Suspend” mode would need to be enabled in either the
“Power” settings in the PhoenixBIOS Setup Utility or Windows 95
Power Management, for detailed instructions see the CF-27 or
Windows 95 Operating Instructions Manual.
The “Ring Resume” option will only appear when the “-ADS or -RAM”
wireless modem for is installed. It will not appear when the “-CDP” modem
is installed.
* NOTE
Main Advanced Security Power Exit
Serial port A: [Auto]
Serial port B: [Auto]
Device: [IrDA]
Serial port C: [Auto]
Ring Resume: [Disable]
Parallel port: [Auto]
Mode: [Bi-directional]
Sound Controller: [Auto]
CardBus Controller A: [Enable]
Disable
Enable