Filter
Top Products
17
Modifying ISDN Link Profiles
Procedure
1. Select Link Profiles, then M
odify.
The FrameSaver unit automatically configures an ISDN Link Profile on the first
ISDN link, with HQ_Site as the Link Name. For subsequent ISDN Link Profiles,
select N
ew.
2. Add a name and phone number to the ISDN Link Profile(s) created by Automatic
Backup Configuration.
— Name for the destination entered (e.g., Tampa). The default setting is HQ_Site.
— Phone numbers entered:
NOTES:
Remember to include local dial-out numbers (i.e., 9, then the number).
For every originating (outbound) phone number entered, an answering
(inbound) phone number must be entered at the far end, and vice versa.
— Maximum Link Rate is changed, if necessary. The default setting is 64 Kbps.
3. S
ave the configuration.
Setting the Criteria for Automatic Backup
Procedure
1. Enable Auto Backup.
Main Menu
→
Configuration
→
Auto Backup Criteria
When a failure occurs, the unit automatically enables the Alternate Link and traffic is
rerouted over the backup (alternate) interface.
2. Specify When Auto Backup Allowed – Always or Restrict. If Restrict is selected,
specify the days and hours of the week during which automatic backup can take
place.
3. S
ave the configuration.
For Originating a Backup Call For Answering a Backup Call
Outbound and Alternate Outbound phone numbers
Valid characters include:
Numbers (0–9)
Special characters * and #
Spaces
Parentheses ( )
Transmit Timing
Inbound Calling ID1 and ID2
These are the phone numbers of
units from which calls will be
accepted.
Valid characters include:
Numbers (0–9)