Filter
Top Products
6
(18) POWER SWITCH
This switch applies power to the unit in the “ON” position. One of the ACTIVE CHANNEL
LEDs (6) will illuminate to indicate that the unit is on. Pressing the lower portion of the switch
turns the unit off.
BACK PANEL
Due to differences in the layout and features of the back panel, both the 112 and 212 back panels are presented. Refer
to the illustration that identifies your model.
112 EFX
212 EFX
(19) IEC CONNECTOR
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug
and ratings for the intended operating voltage is included. The mains cord should be
connected to the amplifier before connecting to a suitable AC outlet.
U.S DOMESTIC AC MAINS CORD
The mains cord supplied with the unit is a heavy-duty, 3-conductor type with a conventional
120 VAC plug with ground pin. If the outlet used does not have a ground pin, a suitable
grounding adapter should be used, and the third wire should be grounded properly.
Never break off the ground pin on any equipment. It is provided for your safety.
NOTE: FOR UK ONLY
If the colors of the wires in the mains lead of this unit do not correspond with the colored
markings identifying the terminals in your plug, proceed as follows: (1) The wire that is
colored green and yellow must be connected to the terminal that is marked by the letter E,
the earth symbol, colored green, or colored green and yellow. (2) The wire that is colored blue
must be connected to the terminal that is marked with the letter N or the color black. (3) The
wire that is colored brown must be connected to the terminal that is marked with the letter L
or the color red.
19 18
19 23
20 24
21
22
20
25 26 2722