Filter
Top Products
11
TT WW EE AA KK FF EE AA TT UU RR EE SS
EEccoouussttiicc
amplifiers offer hidden features to further adjust the parameters of the digital effects. In addition
to the adjustments described in the
EEFFXX AAddjjuusstt
section of this manual‚ additional tweaks may be made to
customize effects to user preferences. Tweaks are made by pressing and holding the EFX ADJUST (10 & 23)
control while simultaneously rotating the
RREEVV//DDLLYY
(9 & 22)control.
Note: The EFX Adjust control must be pressed for at least one second to enter Tweak Mode. Reverb
settings will not be affected while in Tweak Mode.
The surrounding LED ring will now reflect the value of the effect being tweaked. As in standard parameter
changes‚ the effect being tweaked will be the active effect as indicated by the LED adjacent to the effect name.
TTwweeaakk AAddjjuussttmmeenntt PPaarraammeetteerrss
Doubler Delay Time
Phaser Depth
Chorus Wet/Dry Mix
Rotary Speaker Wet/Dry Mix
CCrreeaattiinngg aanndd SSttoorriinngg aa CCuussttoomm PPrreesseett
The following steps explain the creation and storage of two different effects/settings as well as two
different settings for REV/DLY. The Doubler and Chorus effects were selected at random. These steps will
accomplish custom presets using any of the available effects.
1. Assure the footswitch is in the EFX Select Mode by pressing the Mode Select switch (44) if
necessary. The Mode LED (45) will illuminate.
2. Use Preset 1 (46) to select Mute or Un-mute. The Mute LED (47) will illuminate for Mute.
3. Select the position of Preset 2 (48). The Modulation LED (49) may be illuminated or dark at the
discretion of the user.
4. Select Doubler and adjust the amount to preference using the EFX Adjust (10 & 23) control on the
front panel of the Ecoustic (standard adjustment).
5. Press and hold the EFX Adjust (10 & 23) control while adjusting the Doubler delay time to
preference with the RVB/DLY (9 & 22) control on the front panel (Tweak mode).
6. Press Preset 2 (48) to change to the other Modulation position. The Modulation LED (49) will
illuminate or go dark depending on its status in step 5.
7. Select Chorus and adjust rate to preference using the EFX Adjust 10 & 23) control on the front
panel (standard adjustment).
8. Press and hold the EFX Adjust (10 & 23) control while adjusting the Chorus wet/dry mix to
preference with the RVB/DLY (9 & 22) control on the front panel (Tweak mode).
9. Select the position of Preset 3 (50). The REV/DLY LED (51) may be illuminated or dark at the
discretion of the user.
10. Adjust Reverb/Delay to preference using the REV/DLY (9 & 22) control on the front panel.
11. Press Preset 3 (50) to change to the other REV/DLY position. The REV/DLY LED (51) will illuminate
or go dark depending on status in step 10.
12. Adjust Reverb/Delay to preference using the REV/DLY (9 & 22) control.
13. Set the position of Preset 1 (46)‚ Preset 2 (48) and Preset 3 (50) to the settings preferred as
defaults. (Default setting is the one that is active when the preset is selected.)
14. Press the Mode Select (44) switch to return to the Preset Mode.
15. Double-click Preset 1‚ 2 or 3 to store settings in that location.