Peavey not available Musical Instrument Amplifier User Manual


 
1
2
3
4
5
6
7
8 9
17

This 1/4" jack input will accept signals from a variety of acoustic and keyboard instruments.

Controls the Channel One 1/4" phone jack input gain.

An active tone control (shelving type +/-15 dB) for boosting or cutting the bass frequency range.
 Excessive low frequency boost can damage the speaker.

An active tone control (shelving type +/-15 dB) for boosting or cutting the treble frequency range.

Controls the level of the Chorus effect, which simulates the sound of 2 instruments playing together. When the knob is set
to '10', the Chorus/dry guitar ratio is 50:50.

A switch that selects Channel One or Channel Two for the Chorus effect.

This combination jack will accept an XLR or a 1/4" input from a variety of acoustic and keyboard instruments as well as
microphones.

Controls the Channel Two combination jack input gain.

An active tone control (shelving type +/-15 dB) for boosting or cutting the bass frequency range.
 Excessive low frequency boost can damage the speaker.

An active tone control (peaking type +/-15 dB) for boosting or cutting the Mid frequency range.

An active tone control (shelving type +/-15 dB) for boosting or cutting the treble frequency range.

Controls the amount of signal from Channel One and Channel Two sent to the Reverb circuit.

Controls the master volume of both channels combined.

A headphone jack is provided for stereo headphones. This switching jack disengages the internal speaker when plugged
in.

1
2
3
4
5
6
7
8
9
12
11
10
11 12
13
14
13
14
10