Filter
Top Products
19
®
Rated Power:
20 W(rms) into 4 ohm load
(< 3% THD, 1 kHz, 120 VAC line)
Frequency Response:
20 Hz - 20 kHz
Speaker:
80 Hz - 10 kHz
Stereo headphone jack with mono output
Rated output: 60 mW into 4 ohm headphones (minimum
load) @ < 1% THD
(Switching jack disconnects speakers while in use)
System Hum and Noise
-43 dBu (both channels operating)
20 watt RMS into 4 ohms
The following specs are measured @ 1 kHz with the EQ flat @ 0
dB. Nominal values are with levels @ 5, minium values are with
levels @ 10.
Channel 1 Instrument Input:
1/4 inch high Z-input
Input impedance = 1 MOhm
Nominal input level = 180mVrms
Minimum input level = 20mVrms
Maximum input level = 2.0mVrms
Channel 2 Instrument/Microphone Input:
Balanced XLR input
Input impedance = 1 kOhm
Nominal input level: -4.72 dBu, 450mVrms
Minimum input level: -29.8 dBu, 25mVrms
Maximum input level: +8.24 dBu, 2.0mVrms
1/4 inch high Z-input
Input impedance = 1 MOhm
Nominal input level: -12.7 dBu, 180mVrms
Minimum input level: -31.8 dBu, 20mVrms
Maximum input level: +8.24 dBu, 2.0mVrms
Dimensions (H x W x D):
15.00"(381 mm) x8.750" (222.25 mm) x 19.625" (498.475 mm)
Weight:
25 lbs. 11.33 kg)
Specifications subject to change without notice.