Filter
Top Products
PFC'"
10
Professional MIDI Foot Controller
7.0 USING THE CONTROLLER AS A STAND-ALONE MIDI CONTROLLER
All
messages transmitted by the
PFClO
Professional MIDI Foot Controller are standard MIDI messages.
When used with a standard,
5-pin
MIDI
DIN
cable,
the
controller will
transmit Program and CV messages.
Each timeyouturnthe
footcontrolleron,you
need to
setthe
MIDI channelthatthefoot
controller
will
transmit on. The
following message will
appear:
ENTER
MIDI CH17tdtdEL:
CHFIblt4EL =
??
Select the appropriate channel by pressing the numeric buttons.
The PFC 10 Professional
MIDI
Foot
Controller
sends
MIDI
Program Change messages in the Program
Change mode. Programs are arranged in ten banks often programs as previously described.
For example:
If you are currently on program 4 and wish to change to program 58, press the Bank/
Tuner button
once
and then press the 5th numeric button for Bank 5. As soon as you press the 8, Program
Change 58istransmitted.
Now,ifyou
press 3, Program Change 53
will
betransmitted.The
LEDs
will show the
active program number and the display willshowthe
currentbank/program,
as follows:
STRND-FILONE
MODE:
PROGRRM
=
53
8.0 MIDI IMPLEMENTATION
MIDI Channel:
1-16
user
selectable
in STAND-ALONE
mode,automaticallysetwhen
used with Tube Fex
or
TransFex
212.
Peavey Electronics Corporation