Filter
Top Products
10
MIDI Channel
pRP6 is able to transmit MIDI messages on up to three channels, depending
on the type of Preset recalled (single, layer or split). In reception, pRP6 can
receive on all 16 MIDI channels.
The MIDI function allows you to modify the MIDI transmission channels of the
pRP6, used by the pRP6 to communicate with other MIDI devices through a
MIDI cable.
The Midi Channel function does not play a reference note during the setting
operation.
1. Press and hold the MIDI Channel function key (E7) and press the DATA Ħ
button to increase the transmission channel by one unit.
Each time you press the DATA
Ħ
button, the MIDI channel setting
increases by one unit.
Repeat the operations, making a mental note of how many times you
press the DATA
Ħ
button with E7 pressed, until you obtain the required
channel number.
2. Press and hold the MIDI Channel function key (E7) and press the DATA Ĥ
button to decrease the channel setting by one unit.
Each time you press the DATA
Ĥ
button, the MIDI channel setting
decreases by one unit.
Resetting to the default MIDI channel configuration
3. If you are not sure on which transmission channels pRP6 is currently set,
you can reset to the default channel settings (Ch 1, 3 and 2) by holding
down the MIDI Ch. function key (E7) and pressing both DATA Ħ/Ĥ
buttons at the same time.