Peavey PZS 140 Music Mixer User Manual


 
PZS
ª
140 SPECIFICATIONS
POWER OUTPUT:
35 W RMS per channel @ less than 1%
(60 Hz to 20 kHz with all four channels
operating)
OUTPUTS:
4 ½ (direct), 8 ½, 25 V and 70 V (isolated)
CHANNEL 1 and 2 INPUTS:
Mic: 2k ½, -54 dBu, (1.5 mV, balanced)
Line: >50k ½, -18 dBu, (100 mV,
balanced)
XLR Mic: 2k ½, -54 dBu (1.5 mV, balanced)
CHANNELS 3 thru 5 INPUTS:
Mic: 2k ½, -54 dBu, (1.5 mV,
unbalanced)
Line: >50k ½, -18 dBu (100 mV,
balanced)
RCA: >50k ½, -18 dBu, (100 mV,
unbalanced)
INSERTS:
Send: 1k ½, 2.21 dBu, (1 volt,
unbalanced)
Return: 10k ½, 2.21 dBu, (1 volt
unbalanced)
FREQUENCY RESPONSE:
50 Hz to 20 kHz +0, -2 dB (transformer)
SIGNAL TO NOISE RATIO:
Residual: 90 dB below rated power
(channel down, master full up)
Line Inputs: 90 dB below rated power
(controls nominal,2k ½ terminated)
Mic Inputs: 82 dB below rated power
(controls nominal 150 ½
terminated)
TONE CONTROLS:
Low EQ: +10, -10 dB @ 100 Hz
High EQ: +10, -10 dB @ 10 kHz
CONTROLS:
Channels 1 and 2:
Level, low EQ, high EQ four assign switches,
signal presence, muting threshold and adjustable
release time.
Channels 3 thru 5:
Level, low EQ, high EQ, four assign switches
and signal presence
Masters 1 thru 4:
Level, signal presence and clipping LEDs
POWER SUPPLY:
Internal, 120 V AC @ 60 Hz
375 watts all channel at full power
175 watts all channel at 1/8 power
Five-amp fuse
DIMENSIONS: (W x H x D)
19" x 6" x 15.25"
(48.3 cm x 13.3 cm x 38.7)
WEIGHT:
35.4 pounds (15.6 kg)
9