Filter
Top Products
19
Hum and Noise:
Output Residual Noise S/N Ratio Test Conditions
Ref: 0 dBu
Master L/R -105 dBu 109 dB All Faders Down
Mono
-90 dBu 94 dB Master Fader Nominal,
Channel Faders Down,
All Channels Assigned
Submaster -98 dBu 102 dB All Faders Down
-88 dBu 92 dB Submaster Fader
Nominal, Channel
Faders Down,
All Channels Assigned
(Hum and Noise Measurements: 22 Hz to 22 KHz BW)
Equivalent Input Noise (EIN):
-128 dBu (Input terminated with 150 Ohms)
Crosstalk:
>90 dB Adjacent Input Channels (20 Hz - 20 kHz)
>70 dB Left to Right Outputs (20 Hz - 20 kHz)
Common Mode Rejection Ratio (Mic Input):
50 dB min (20 Hz - 20 kHz)
70 dB typ @ 1 kHz
Meters:
L/R Master and all Submasters = 12 segment, peak reading
(0 dB= +4 dBu)
Signal / Overload Indicators:
Red LED lights 2 dB below clipping
Lamp Power:
12 VDC @ 350mA per connector, or 12VDC @ 700mA total maximum load
Power Requirements:
DOM: 100 VAC –240 VAC 50/60 Hz 70 Watts Nominal, 24 chan
80 Watts Nominal, 32 chan
RQ
™
4324
Height: 8.9" (226 mm)
Width: 36.6" (930 mm)
Depth: 19.5" (495 mm)
Weight: 36 lbs. (16.4 kg)
RQ
™
4332
Height: 8.9" (226 mm)
Width: 44.6" (1132 mm)
Depth: 19.5" (495 mm)
Weight: 48 lbs. (21.8 kg)
Dimensions: