Filter
Top Products
1
Before start (Important)
Pioneer provides a settings file(XML file) exclusively for use with
the Serato “Scratch Live” DJ software. Scratch Live can be
controlled from this unit if this file is imported to your computer.
･ A computer on which Scratch Live is installed is required.
･ A separate Scratch Live-certified mixer or sound card is required.
･ Not all functions of Scratch Live are supported.
Users should make their own settings as necessary.
･ To make additional settings, see the operating manual included
with your Scratch Live-certified device.
･ To operate Scratch Live by using this unitʼs buttons and knobs,
see the separate “DDJ-SP1 Hardware Diagram for Serato
Scratch Live 2.5”(PDF file) of supported functions.
･ There are 2 separate settings files for 2 decks and 4 decks.
If you use a Scratch Live-certified device with only 2 decks,
use the settings file for 2 decks(filename: PIONEER_DDJ-SP1
_VXXX_2DECKS.xml).
If you use a Scratch Live-certified device with 4 decks,
use the settings file for 4 decks(filename: PINEER_DDJ-SP1
_VXXX_4DECKS.xml).
Backing up the current settings file
We recommend backing up the current settings file using the
procedure below so that the current settings can be restored
if necessary.
! The users who use Scratch Live for the first time should skip
this process.
1. Connect a Scratch Live-certified device and a
computer using a USB cable.
2. Launch Scratch Live.
3. Select [SETUP] in the upper right of the
screen.
4. Select [MIDI] tab on the “SETUP” screen.
! Only when a Scratch Live-certified device is connected,
the [MIDI] tab will appear.
5. Click [Save As] button.
Save the file with an easily identifiable name.
(e.g. BackUp.xml)
Cautions:
Scratch Live is a product of Serato.
Pioneer is not in the position of answering any inquiries on the
usage of Scratch Live. Please refer to the operating manual of
your Scratch Live-certified device or other resources.
General Disclaimer
･
Pioneer will accept no responsibility whatsoever for damages
resulting from downloading or installing this settings file.
Operation of this settings file is not guaranteed.
･ Users should take full responsibility for downloading, installing
and using this settings file.
･ The specifications of this settings file are subject to change
without notice.
･ Please note that services regarding this settings file may be
terminated without notice.