Filter
Top Products
27
En
English
Changing the settings
1
1
Setup item button
1 Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least
1 seconds.
The [USER SETUP] mode setting screen is displayed.
The [LIVE SAMPLER (UTILITY, WAKE UP)] indicator flashes.
! To display the [CLUB SETUP] screen, first turn this unit’s power
off, then press [POWER] while pressing [LIVE SAMPLER (UTILITY,
WAKE UP)].
2 Press the setup item button.
The selection items appear.
3 Select the setup item.
Select the item on the touch panel and enter it.
4 Change the item’s setting.
Select the item on the touch panel and enter it.
! Press [SAVE] to save the changes to the [CLUB SETUP] screen.
5 Press [EXIT].
Close the [USER SETUP] mode setting screen.
! To close the [CLUB SETUP] mode setting screen, press the [POWER]
button to turn this unit’s power off.
Setting preferences
Settings indicated in italics are the default settings set upon purchase.
Mode Options settings Selection item 1
Selection
item 2
Selection item 3 Descriptions
USER SETUP
MIDI
ZONE11
BUTTON ACTION
TOGGLE
Select the MIDI signal sending method, [TOGGLE] or
[TRIGGER].
TRIGGER
MIDI CHANNEL
1, 2, to 16 Sets the MIDI channel.
ZONE22
BUTTON ACTION
TOGGLE
Select the MIDI signal sending method, [TOGGLE] or
[TRIGGER].
TRIGGER
MIDI CHANNEL
1, 2, to 16 Sets the MIDI channel.
RESET
—
Restores the [TYPE A] – [TYPE D] MIDI settings to the
default values. [RESET] function is unique to [ZONE2].
FADER START
LINK
CH1 to CH4 ON, OFF
Turns the fader start function on and off for all DJ players
connected to the [LINK] terminals.
CONTROL
CH2, CH3 ON, OFF
Turns the fader start function of the DJ players connected to
the [CONTROL] terminals on and off.
LCD BACK LIGHT
1, 2, 3, 4, 5 — Adjusts the touch panel’s brightness.
VERSION No.
— — — Displays this unit’s software version.
QUANTIZE QUANTIZE
ON, OFF —
Turns use of the beat information obtained from the player
on and off.
CLUB SETUP
SYSTEM
DIGITAL OUT MAX LEVEL
–19 dB, –15 dB,
–10 dB, –5 dB
—
Sets the maximum level of the sound output from the
[DIGITAL OUT] terminals.
1
DIGITAL SAMPLING RATE
48 kHz, 96 kHz — Sets the digital signal’s sampling rate.
AUTO STANDBY
ON, OFF — Turns the auto standby function on and off.
MIC
OUTPUT TO BOOTH
MONITOR
ON, OFF —
Sets whether or not to output the microphone’s audio signals
from [BOOTH] terminals.
TALK OVER THRESHOLD
LEVEL
–25 dB, –20 dB,
–15 dB, –10 dB
—
Sets the talkover sensitivity. The talkover function is activated
when a sound with a volume above the set volume is input to
the microphone.
TALK OVER LEVEL
–25 dB, –20 dB,
–15 dB, –10 dB
—
Sets the attenuation level for the sound other than the micro-
phone’s sound when the talkover function is activated.
TOUCH PANEL
— — —
The touch panel’s calibration is adjusted by pressing [+] in
order.
PEAK LIMITER PEAK LIMITER
ON, OFF —
Alleviates sudden, unpleasant digital clipping of the master
output.
FACTORY RESET
YES, NO — — Restores all the settings to their factory defaults.
1 Changes the MIDI settings of the buttons on the control panel, [FREQUENCY MIX] and [SIDECHAIN REMIX].
2 Changes the MIDI settings for [TYPE A] to [TYPE D] on the MIDI control screen.
About the auto standby function
When [AUTO STANDBY] is set to [ON], the standby mode is set automatically if 4 hours pass with all of the conditions below met.
— That none of this unit’s buttons or controls are operated.
— That no audio signals of –10 dB or greater are input to this unit’s input terminals.
— That no PRO DJ LINK connections are made.
! The standby mode is canceled when [LIVE SAMPLER (UTILITY, WAKE UP)] is pressed.