Filter
Top Products
6
<DRB1353>
CONNECTIONS
FADER CURVE
FADER START
PHONES
POWER
CROSS FADER 2CROSS FADER 1 CH-2CH-1
CH-1 C.F. CH-2
MAXMIN
FADER CUT LAG
C.F. 1 CH-1 C.F. 2 CH-2
FADER REVERSE
OFF
ON
OFF
ON
OFF
ON
PROFESSIONAL 2CHANNEL MIXER
DJM-707
2. Connecting Headphones (front panel)
Headphones
3. Output Connections
External effector 6
Use a 6.3 mm monaural plug to connect the external
effector’s input connectors to the DJ mixer’s SEND jacks.
When using an effector with a monaural input, connect it to
the L channel output only. The signal actually sent to the
effector will represent a mix of L and R signals.
Use a 6.3 mm monaural plug to connect the external effector’s
output connectors to the DJ mixer’s RETURN jacks.
When using an effector with monaural output, connect only
the L channel input. The signal received from the effector will
be input to both L and R channels.
Master output
MASTER 1 7
XLR type balanced output.
MASTER 2 8
RCA type unbalanced output.
BOOTH/SESSION OUT 9
These jacks are provided for booth monitor output.
The sound volume here is controlled by the booth monitor
level dial, regardless of the setting of the MASTER LEVEL
dial.
When using this unit in tandem with another mixer, connect
these jacks to the other mixer’s session input connectors.
Power cord p
After completing all other connections, connect the power
plug to a standard power outlet or to the auxiliary power
outlet of an amplifier.
BOOTH/
SESSION OUT
CD
PHONO
/ LINE
PHONO
/ LINE
PHONO
LINE
SIGNAL
GND
RL
(MONO) (MONO)
MASTER 2
MASTER 1
SEND RETURN
CH-2
CD
CH-1
MIC
PHONO
LINE
SIGNAL
GND
CH-2 PLAYER
CONTROL
CH-1 PLAYER
CONTROL
3 COLD
1 GND
2 HOT
SESSION IN
R L
R R
R
R
L
R
L
L
L
L
R
L
R
L
Power amplifier
(supporting RCA input)
External effector
Power amplifier
(for booth monitor)
To SESSION IN jacks of other mixer
p
Power cord
Power outlet
Power amplifier
(supporting XLR input)
8
9
6
7
5
Headphones 5
Use to connect headphones with a 6.3 mm diameter stereo
plug.
RL