Filter
Top Products
23
En
Category
Button/Control/Switch
MIDI assignment Trigger/Toggle Transmitted data
Name Type
BEAT EFFECTS
CH SELECT
CH1
Switch CC 034
2
OFF=0, ON=127
CH2
Switch CC 035
2
OFF=0, ON=127
CH3
Switch CC 036
2
OFF=0, ON=127
CH4
Switch CC 037
2
OFF=0, ON=127
MIC
Switch CC 038
2
OFF=0, ON=127
CF.A
Switch CC 039
2
OFF=0, ON=127
CF.B
Switch CC 040
2
OFF=0, ON=127
MASTER
Switch CC 041
2
OFF=0, ON=127
MIDI LFO
Control CC 118 — 0-127
QUANTIZE
Button Note 118 Trigger/Toggle —
BEAT EFFECTS
TIME
Switch CC 013 — —
Switch CC 045 —
TIME value (When FLANGER, PHASER
or FILTER is selected, the value is halved.
When a negative value is selected, it is set
to a positive value.)
LEVEL/DEPTH Control CC 091 — 0-127
X-PAD
Control CC 116 — Sends the [X-PAD] position information.
ON/OFF
X-PAD (touch)
! When an effect other than [SND/RTN (MIDI
LFO)] is selected at BEAT EFFECT
Button CC 114
2
OFF=0, ON=127
ON/OFF
X-PAD (touch)
! When [SND/RTN (MIDI LFO)] is selected at
BEAT EFFECT
Button CC 064
2
OFF=0, ON=127
MIC
HI
Control CC 030 — 0-127
LOW
Control CC 031 — 0-127
SOUND COLOR FX
NOISE
Button CC 085
Trigger/Toggle
1
OFF=0, ON=127
SPACE
Button CC 105
Trigger/Toggle
1
OFF=0, ON=127
GATE/COMP
Button CC 106
Trigger/Toggle
1
OFF=0, ON=127
DUB ECHO
Button CC 107
Trigger/Toggle
1
OFF=0, ON=127
CRUSH
Button CC 086
Trigger/Toggle
1
OFF=0, ON=127
FILTER
Button CC 087
Trigger/Toggle
1
OFF=0, ON=127
Fader Start
Fader Start 1
Button CC 088 Trigger/Toggle OFF=0, ON=127
Fader Start 2
Button CC 089 Trigger/Toggle OFF=0, ON=127
Fader Start 3
Button CC 090 Trigger/Toggle OFF=0, ON=127
Fader Start 4
Button CC 093 Trigger/Toggle OFF=0, ON=127
HEADPHONES
MIXING
Control CC 027 — 0-127
LEVEL
Control CC 026 — 0-127
Timing Clock
— Timing Clock — —
Fader Start operation
3
Channel fader 1 or crossfader Note 102 — BACK CUE = 0, PLAY = 127
Channel fader 2 or crossfader Note 103 — BACK CUE = 0, PLAY = 127
Channel fader 3 or crossfader Note 104 — BACK CUE = 0, PLAY = 127
Channel fader 4 or crossfader Note 105 — BACK CUE = 0, PLAY = 127
MIDI
START
Button START — —
STOP
Button STOP — —
1 When turning one button on switches another button from on to off, MIDI on and off messages are sent from the two buttons.
When there is no button that switches off, only the MIDI on message is sent from the button that was pressed.
2 When switched from one position to another position, the MIDI ON and OFF signals are sent respectively from both positions.
— When the [START/STOP] button is pressed for over 1 second, MIDI messages corresponding to the positions of the buttons, faders and controls are sent in a bundle (Snapshot).
The MIDI Snapshot sends all MIDI messages other than MIDI start and MIDI stop.
3 Operation differs depending on the setting of the [CROSS FADER ASSIGN (A, THRU, B)] selector switch.
— When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [THRU]: MIDI messages are sent when the [FADER START] button is set to [ON] and the channel fader is moved away
from you from the nearest position towards you and when it is moved back to the nearest position towards you.
— When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [A]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far
edge of the [B] side and when it is moved back to the far edge of the [B] side.
— When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [B]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far
edge of the [A] side and when it is moved back to the far edge of the [A] side.
MIDI assignment map