Filter
Top Products
9
Troubleshooting
I can’t hear any sound or sound is very quiet
z Make sure your DAP-601ES and amplifier are switched on
z Check that you have connected the DAP-601ES to your amplifier and source correctly
z Check that you have selected the correct input, see Selecting an input on page 6
z Check that MUTE is not selected or that your amplifier is not turned down
No sound from a single or pair of speakers
z Check that the relevant speaker channel is switched on by checking that the corresponding LEDs are lit up on the front panel, see Switching
channels on and off on page 8
z Check that the speaker wires are securely connected to your amplifier and speaker
z If there is no sound from your powered subwoofer, check that it is turned on and connected correctly
I can’t apply acoustic effects or adjust equalisation
z Check that Pro Logic II is not switched on, see Selecting Pro Logic II modes on page 7
z Check that you are not processing a multi-channel signal – acoustic effects are not applicable to these sources
Remote control not functioning
z Check that you have inserted the batteries correctly
z Ensure that the remote sensor on the front panel is not obscured
z Move closer to the unit and try again, if it works, this could be sign of weak batteries or that you were too far away from the unit
My remote is lost or broken
If your remote does not function and you have confirmed that it is not due to any of the reasons given above, contact your retailer or VideoLogic
Technical Support to obtain a replacement.
Accessories
VideoLogic supply a range of accessories, including speaker cables, speaker stands and brackets and complementary products including DAB
digital radios and amplifiers.
Visit our website at www.videolologic.com or call us on 01923 277 488 to find out more.
Technical Support
The Troubleshooting section of this manual lists some of the more likely reasons for problems you might encounter with your DAP-601ES.
If you still have a problem with your unit, contact your retailer, visit our website at www.videologic.com or contact us using the details on the
back cover of this manual for the latest support information.
Warranty information
VideoLogic Systems Ltd. (“VideoLogic”) warrants to the end user that this product will be free from defects in materials and workmanship in the
course of normal use for a period of two (2) years from the date of purchase.
Please return the enclosed warranty card to your nearest VideoLogic centre to register your product with us.