PYLE Audio PDWM9000 Microphone User Manual


 
5
6. Specifications
System Specifications
Carrier Frequency: UHF 790-806MHz
Frequency Stabilization < 30ppm
Dynamic Range: More Than 90dB
Total Harmonic Distortion: LessThan 0.5%
Frequency Response: 40HZ-15KHZ 3dB
Audio Output Level: Unbalanced Out:0 400mV
......................
........................
............
...................
....................
................
±
±
±
Balanced Out: 0 ±
200mV
1. Unit does not turn on.
• Make sure the power cable is connected properly.
2. AF display moves, but there is no sound output.
3. The effective receiving distance decreases.
• Check the fuse.
• Check the voltage selector
• Check volume level.
• Check audio cable.
• Check the settings on your amplifier
• Change batteries.
• Check for any devices that may be causing interference.
4. Sound Quality Deteriorates
• Change Batteries.
• Check for any devices that may be causing interference.
• Do not use two machines with the same frequency at the
same time.
Receiver Specifications
Power Supply: AC11 220V 50 DC12V
Power Consumption: 5 Watts
S/N Ratio: 90 B
Image & Spurious Rejection: 80d
Border Upon Channel Rejection: 80d
Receiving Sensitivty: 10dBuV(SINAD=30dB)
...........................
....................
................................
..........
......
....................
0 60HZ/ HZ or
>d
>B
>B
<
5. Troubleshooting
Caution:
Do not open the unit. There are no user serviceable parts
inside. Refer service to a qualified technician.