Filter
Top Products
7
To erase a programmed sequence during programming,
press
STOP
.
C;CEHO
C;CEHOC;CEHO
C;CEHO
disappears.
To erase a programmed sequence after programming,
press
PROGRAM.
Then press
STOP
.
C;CEHOý
C;CEHOýC;CEHOý
C;CEHOý
disappears.
To erase a programmed sequence at any time, press
OPEN/
CLOSE
, or press
POWER
.
-#4#1-'
When a microphone is plugged into
MIC 1
or
MIC 2
, the
system mixes the microphone output with recorded music
from CDs or CDGs. Rotate
MIC VOLUME
to a comfortable
listening level, and
AUTO VOICE
for the best balance
between playback and microphone levels.
Rotate
ECHO
to add depth and richness to vocals.
5KPIKPI"#NQPI"9KVJ"#"%&1%&)"
1. Press POWER to turn on the system. The POWER
indicator turns on.
2. Load a CD/CDG in the CD compartment.
3. Set
AUTO VOICE
to the desired position, to enjoy both
the music and original singer’s voice. Whenever you
sing along, the original singer’s voice is cancelled.
4. Press
PLAY/PAUSE
to start play.
5. Adjust
MASTER VOLUME
to the desired level.
6. Set the microphone’s
ON/OFF
switch to
ON
and rotate
MIC VOLUME
to adjust the microphone’s volume.
7. Sing directly into the microphone along with the music.
8. Adjust
ECHO
for the desired reverberation.
9. When you finish, press
STOP
on the CD/CDG. Then
press
OPEN/CLOSE
to open the compartment door and
remove the CD.
10. Set each microphone’s
ON/OFF
switch to
OFF
, then
press
POWER
to turn off the system.