Revolabs 03-ELITEEXEC4-JP Microphone User Manual


 
81
The Elite Omni-Directional Wireless Tabletop Boundary
Microphones
The Elite Omni-directional Wireless Tabletop Boundary Microphones enable
multiple conference attendees to use a single microphone.
1. Mute touch areas & LEDs — touch to mute, un-mute, or pair the
microphone. LEDs provide visual status for mute, un-mute, and pairing.
The omni-directional microphone provides four mute touch areas and status
LEDs, one on each side of the microphone. Any one of these touch areas
may be used to mute and unmute the microphone.
2. Charging connector — connects to the charging pins of the Elite charging
tray or crossover adapted.
3. Battery door latch — open the battery door using this latch.
4. Rechargeable batteries — replace batteries only with NiMH 2000mA
rechargeable batteries. Non-rechargeable batteries or rechargeable batteries
of a different type or lower charge might impact performance of the
microphone, and might cause harm to the microphone, users, or the
environment. Using non-approved battery types will void the warranty on
the microphones. When replacing the batteries, ensure that the batteries
are placed in the correct way as indicated by the print in the battery cavity
of the microphone.
5. Battery charge status LED — under the screen, warns for low battery. The
LED will turn yellow when there are 4 hours of talk time remaining and red
for the last two hours of charge.
1
2
3
4
5