Connections
9
%100'%6+0)10'5 2'#-'4
Connect the speaker’s negative (-) terminal to the
amplifier’s COM terminal. Then, connect the
speaker’s positive (+) terminal to the speaker
terminal (4
Ω, 8 Ω, or 16 Ω) that matches the
speaker’s impedance.
%100'%6+0)69152'#-'45+0
5'4+'5
Speakers are connected in series when the first
speaker’s positive terminal is connected to the next
speaker’s negative terminal.
• Determine the total speaker impedance of
speakers you want to connect in series by
adding up the individual impedances of all the
connected speakers.
For example: If connecting two 4-ohm
speakers in series, your total speaker
impedance is 8 ohms.
Speaker Terminals