Filter
Top Products
37
Selecting and Playing Sounds
Selecting and Playing Sounds
Immediately after the power is turned on, the STANDARD drum set will sound.
Let’s try selecting a different Drum Set or the Sound Effect set.
As the drum set, you can choose from 7 types of drum set. When you change
the drum set, the sound produced by each note will change.
fig.02-19
1.
Press the [Drums/SFX] button (indicator lights).
2.
When the Drum Set name is displayed on the screen, press
the Value [-] [+] buttons to select a Drum Set or Sound Effect
Set.
The [Drums/SFX] button indicator will begin to blink.
fig.02-20
You can select from 6 different Drum Sets and one set of Sound Effects as
follows:
To stop mid-way through this or any procedure, press the [Display/Exit]
button.
3.
Press the [Drums/SFX] button once again.
The [Drums/SFX] button indicator will light constantly, and the selected
Drums/SFX set will be applied.
Changing the Drums/SFX Set
Drum Sets
STANDARD, POWER, ELECTRONIC, JAZZ, BRUSH, ORCHESTRA,
SOUND EFFECTS
NOTE
For some drum sets, there will
be keys that do not sound.
Refer to “Voice & Rhythm List”
(Appendix: separate booklet)
for details on which drum
sound or Sound Effect will be
played by each note.
2
2
1, 3
You can also play the lower
manual to confirm the drum set.
AT-75_e.book 37 ページ ２００８年８月２１日 木曜日 午前１０時９分