Filter
Top Products
43
Additional Convenient Functionality <Advanced Operation>
“Visual Control” is a function that allows music and images to be performed together. When MIDI Visual Control- or V-LINK
compatible devices are connected via MIDI, you’ll be able to easily switch clips are linked to the expressive elements of your
performance.
■ Turning Visual Control on/off
1.
Connect the C-200’s MIDI Out socket to the MIDI In
socket of your optional MIDI Visual Control/V-LINK
video device.
2. While holding down the [Function] piston, press the
[REC/Visual Control] piston switch on the Visual
Control function.
3. To turn Visual Control off, once again hold down
[Function] and press the [REC/Visual Control] piston.
■ Selecting clips on an optional MIDI Visual
Control/V-LINK-compatible device
Visual Control messages are transmitted on MIDI chan-
nel “16”.
1. Press a key in the highest octave (G#6~G7) to select the
desired clips on the external optional MIDI Visual
Control/V-LINK-compatible device.
When the Visual Control Function is active, the G#6~G7
keys are temporarily unavailable for playing notes.
Visual Control messages are transmitted on MIDI chan-
nel “16”.
Using the Visual Control function
Press key MIDI Visual Control/V-LINK MIDI
Message
G#6 Switch images (Clip 1) CF 00
A6 Switch images (Clip 2) CF 01
A#6 Switch images (Clip 3) CF 02
B6 Switch images (Clip 4) CF 03
C7 Switch images (Clip 5) CF 04
C#7 Switch images (Clip 6) CF 05
D7 Switch images (Clip 7) CF 06
D#7 Switch images (Clip 8) CF 07
E7 Switch images (Clip 9) CF 08
F7 Switch images (Clip 10) CF 09
F#7 Switch images (Clip 11) CF 0A
G7 Switch images (Clip 12) CF 0B
Visual Control key range
G#6 G7
C-200_e.book Page 43 Monday, April 4, 2011 5:22 PM