Filter
Top Products
8
Making Detailed Settings for Effects (Edit Mode)
This adds lingering reverberations to the sound.
This produces a variety of effects using the ME-25’s expression pedals.
For information on how to use pedal effects, read “Using Pedal Effects” (p. 3).
REVERB
Explanation
1: ROOM
This simulates the reverberations inside a room.
- - LEVEL:
This sets the volume
level of the effect.
2: HALL
This simulates the reverberations inside a hall.
PEDAL FX (Pedal Effects)
Explanation
1: WAH
This is a wah effect.
- - -
2: +1 OCTAVE
This lets you continuously vary the pitch up to one octave
higher or lower than the original sound.
* Play only single notes when using the octave effect.
3: -1 OCTAVE
4: FREEZE
This lets you sustain sound by operating a pedal. You can
use this to hold a chord sound while playing a melody line.
Using FREEZE
1. Press the heel of the expression pedal.
2. Play the guitar, and while the sound is playing, press the toe of the expression pedal.
The sound is sustained for as long as you keep the pedal pressed.
* You can adjust the volume of the sustained sound by changing the pedal position.
3. Pressing the heel of the expression pedal stops the sustained sound.
ME-25_e.book 8 ページ ２００９年１２月１８日 金曜日 午後１０時３８分