Roland RD-600 Electronic Keyboard User Manual


  Open as PDF
of 4
 
®ÂØÒňΠRD-600 Supplemental Notes
© 1997 Roland Corporation U.S. Sequencing with the RD-600 Page 4 of 4
IX. Customizing The Keyboard
Here are some extra features available to help you in the operation of the RD-600:
U
se the following procedure to set the RD-600 to power up with your current Setup:
1) While holding EDIT, press SPLIT.
2) Press the PAGE F button three times to select Powerup Mode.
3) Press INC/YES to change DEFAULT to LAST.
There is a Control Channel setting in the RD-600 that will allow you to change Setups with a MIDI program
hange message. Use the following procedure to set the Control Channel:
c
1) From the Powerup Mode page, press the PAGE F button three times to select Control Ch.
2) Use the INC and DEC buttons to select a MIDI channel that will not be used in your sequence (i.e. Channel
16). If you set the Control Channel to a channel that you are using, you may inadvertently change your Setup
instead of the desired Patch.
NOTE: Sending a program change from 1-64 to MIDI Channel 16 will now change entire Setups.
3) To disable the Control Channel function press INC and DEC simultaneously.
 previous