Filter
Top Products
Choose “PRESET D-8”. The sawtooth wave is selected.
Since bass involves low frequencies, turn the [PITCH] knob on the OSC section all the way
to left, and set to (-12). Now the sound is lowered by 1 octave.
Turn the [CUTOFF] knob on the FILTER section all the way left and set to (MIN).
The sound becomes inaudible.
Let’s create the initial attack of the sound. Raise the [D] slider of the FILTER ENV a little.
Let’s determine the timbre of the sustained note. Raise the [S] slider
of the FILTER ENV a little.
In order to achieve the effect of sliding over the frets while holding the string down
(glissando), press the [SOLO] button.
Slightly raise the [DEPTH] slider of the FILTER ENV to determine the overall timbre.
The attack is weakened, and sound will be darkened.
Press the [SLOPE] button and select -24dB. The core of the sound is retained,
yet it sounds a little darker now.
Turn the [RESONANCE] knob and add a little bite to the sound as you like.
Press the [FX ON] button.
Turn the [TIME] knob in the EFFECTS section all the way left to (MIN).
Turn the [DEPTH] knob and fatten the bass timbre.
Lastly, fine adjust the [DEPTH] slider of the FILTER ENV to determine
the overall sound.
1
2
3
4
5
6
7
8
9
10
11
12
Choose “PRESET D-8”. The sawtooth wave is selected.
Turn the [CUTOFF] knob in the FILTER section to the “two o’clock” position.
Turn the [RESONANCE] knob in the FILTER section to the “one o’clock” position.
Let’s create the initial portion of the sound. Raise the [A] and [D] sliders
of the FILTER ENV a little.
Determine the overall timbre by raising the [DEPTH] slider of the FILTER ENV.
Press the [SLOPE] button in the FILTER section and select -24dB.
The sound gains more bite by doing so.
Press the [PORTAMENTO] button.
To further enhance the lead synth sound, press the [SOLO] button.
Now it plays monophonic (a single note at a time). Also when you hold a key while pressing
another key, the two notes will transition smoothly.
Press the [FX ON] button.
Position the [TIME] knob at “twelve o’clock”. Turn the [DEPTH] knob and add some echo
effect to the lead sound (delay).
1
2
3
4
5
6
7
8
9
10
Synth Bass
1
Synth Lead
2
Synth-Programming Examples Synth-Programming Examples
10 11
116
2
741 1
389
910
1087 54
263
12
5
5
Chapter
Synth-Programming Examples
19 20
5
Chapter
Synth-Programming
Examples