Filter
Top Products
20
Returning Settings to Their Factory Defaults
You can return the following settings to their original factory defaults.
• Slice Pattern tempos
• Expression Pedal Function setting (p. 15)
• The tempo response when slice patterns are switched (p. 16)
• Output Mode setting (p. 17)
• Retrigger Mode setting (p. 19)
* Carrying out the following procedure completely clears the content currently stored in the memory.
1.
Switch off the power.
2.
While holding down the OUTPUT MODE button, switch on the power.
The MONO indicator flashes.
* Plugging into the INPUT R/MONO jack switches on the power.
3.
Press the OUTPUT MODE button.
The MONO indicator flashes rapidly, the setting is stored in memory and the unit
returns to its normal state.
* To cancel the setting change and the unit returns to its ordinary state, then before you press the
OUTPUT MODE button, operate the START/STOP pedal or TAP pedal.
* Be sure not to turn off the power while the MONO indicator is flashing rapidly.
SL-20_e.book 20 ページ ２００８年３月２８日 金曜日 午前８時２８分