Filter
Top Products
7
Assemble the “TD-6K”
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all
devices before making any connections.
When you have finished making the connections, proceed with the TD-6's settings.
Settings optimized for the TD-6K are provided in factory settings on the TD-6. For more detailed information, refer to the
TD-6 Owner's Manual.
Monaural
(1 meter)
Monaural
(2 meters)
Stereo
(2 meters)
Monaural
One line
Stereo
Two lines
Using the provided cables, connect the pads, cymbal pads, hi-hat
control pedal, and kick trigger unit. Carefully refer to the numbers
shown in the illustration and connect to the appropriate TRIGGER
INPUT jacks on the TD-6's rear panel.
Stereo Cable (2 meters) x 2
Crash 1 (CY-6)
Ride (CY-6)
Monaural Cable (1 meter) x 3
Snare (PD_6)
Hi-Hat (PD-6)
Tom 1 (PD-6)
Monaural Cable (2 meters) x 4
Tom 2 (PD-6)
Tom 3 (PD-6)
Kick (KD-7)
Hi-Hat Control Pedal (FD-6)
TD-6
Crash 1
CY-6
Ride
CY-6
Tom 2
PD-6
Tom 1
PD-6
Kick
KD-7
Hi-Hat Control Pedal
FD-6
Snare
PD-6
Hi-Hat
PD-6
Tom 3
PD-6
Leave some slack
in the cable